Owner`s manual

SETUP MENU
INPUT SELECTION
SETUP MENU  INPUT SELECT
To select the input signal of connected video and audio devices, follow these steps:
• Press MENU on the remote to begin the SETUP MENU.
• Press the  button until INPUT SELECT appears, then press ENTER.
• Press the  button to make a selection, then press ENTER.
• After selecting the input signal, press the  button and select RETURN followed by
ENTER to go to the previous SETUP MENU and continue through the system setup
process. (Press EXIT to leave the SETUP MENU completely.)
INPUT ASSIGNMENT
SETUP MENU  INPUT ASSIGN
There are various input sources--HDMI 1, HDMI 2, HDMI 3, HDMI 4, HDMI 5, HDMI
6, COMPONENT 1, CONPONENT 2, RGB, Input 1, Input 2, Input 3, Input 4, Input 5, Input 6,
Input 7, and Input 8. To match the output of connected video and audio devices as well as the
input jacks, use these four functions:
A. CHANGE INPUT NAMES
SETUP MENU  INPUT ASSIGN  CHANGE INPUT NAMES
The name of a selected input may be customized with up to twelve characters. For
example, INPUT 2 may be modified to read DVD 7 or DVD 8.
• Press MENU on the remote to begin with the SETUP MENU.
• Press the  button until INPUT ASSIGN appears, then press ENTER.
• Press the  button to select an INPUT CHANNEL, then press ENTER.
• Press ENTER again to select the input channel, then the INPUT CHANNEL
menu will appear.
• Scroll to CHANGE INPUT NAMES and press ENTER. The cursor will automatically
appear beneath the first character in the current input name.
19