Owner`s manual

CONNECTIONS

TWO TELEVISIONS OR MONITORS ALONG WITH TWO SURROUND SOUND

PROCESSORS WITH AN HDMI INPUT AND OUTPUT

•

Using an HDMI cable, connect a surround sound processor directly to the HDMI

1 output of Cinema 11v. Using another HDMI cable, connect the television or monitor

directly to the HDMI output of Cinema 11a.

•

Using an HDMI cable, connect the surround sound processor directly to the HDMI

2 output of Cinema 11v. Using another HDMI cable, connect the television or

monitor directly to the HDMI output of Cinema 11a.

The PRE-SET of EDID in Cinema 11v is automatically set to HDMI 2. In this configuration, no

sound will pass to the television. The surround sound processor must be on, and then sound

will be processed by the surround sound processor. If the EDID is set to HDMI 1, the surround

sound process will receive only an LPCM signal. Read more about this in the Sound Options

section of the manual.