Owner`s manual

CONNECTIONS
ONE TELEVISION OR MONITOR ALONG WITH ONE SURROUND SOUND
PROCESSOR WITH AN HDMI INPUT AND OUTPUT
• Using an HDMI cable, connect the television or monitor directly to the HDMI 1 output of
Cinema 11v.
• Using an HDMI cable, connect the surround sound processor directly to the
HDMI 2 output of Cinema 11v.
The PRE-SET of EDID in Cinema 11v is automatically set to HDMI 2. In this configuration, no
sound will pass to the television. The surround sound processor must be on, and then sound
will be processed by the surround sound processor. If the EDID is set to HDMI 1, the surround
sound process will receive only an LPCM signal. Read more about this in the Sound Options
section of the manual.
16