User manual

6.3.2 Overwrite
6.3.4.1 Mask Area
REC. Setting
Scheduled Time
Overwrite
Section
Motion Detection
Yes
No
REC. Setting
Scheduled Time
Overwrite
Section
Motion Detection
6.3.3 Section recording time set up
H: high level
M: middle level
L : low level
* system will be triggered very easily if
sensitivity is set under high level.
A. system will delete the first 300MB
files once the SD card is full to
save new files
6.3.4 Motion detection
Motion Detection
Mask Area
Sensitivity
Speed
Noise Margin
REC. Setting
Scheduled Time
Overwrite
Section
Motion Detection
6.3.4.2 Sensitivity
Motion Detection
Mask Area
Sensitivity
Speed
Noise Margin
H
L
M
B. set up section recording time
* only available under “Manual”,
“Scheduled” and “Power Up Rec.”
modes
*2.5 min section recording time is
fixed under “Motion Detection” mode
B. press direct ion keys to move the cursor to
choose the area needn’t be detected
C. press “OK” to confirm
blue grids area won’t be motion-detected
D. all grids area that the camera covers are
recorded in image
13
12
C. set motion detection details
A. enter into “Mask Area”, the screen will be
shown in grids as below:
15分钟
15min
1hr
30min
5min
1min
使用说明书
Manual
Manual