User manual

Card Info
Total Size : 30784MB
Used Size : 98.6%
Remain Size : 1.4%
6.6.4 Memory card information
*check card memory
*press “ESC” to exit
System Setting
Language
Time
Format
Card Info.
Alarm Period
6.6.5 Alarm Period
21
20
Always OFF
10Sec
20Sec
30Sec
Timestamp
* choose alarm ON/OFF, and length
* system outputs a 12V voltage for external
alarm devices when motion detection is
triggered
6.6.6 Time Stamp
System Setting
Language
Time
Format
Card Info.
Timestamp
Alarm Period
YES
NO
* choose Timestamp ON/OFF
使用说明书
Manual
Manual
7. F.A.Q.
Q: DVR can not read SD card.
: Please use
Q: No images on TV after turn on the DVR.
A: Please check the cable is correctly connected. Yellow connector should connect with
video input port on TV.
Q: No sounds when playing video.
A: Please check the cable is correctly connected. Red connector should connect with audio
input port on TV.
B: The camera connected with DVR should be with audio feature.
Q: No recorded files in SD card after system records.
A: 1. Please check if the SD card works with DVR normally;
2. Please use 1GB to 32GB genuine SD card.
Q: DVR system crashes when it is on.
A: 1. You can not take out or insert SD card when it is on;
2. Please make sure it is a genuine SD card.
Q: DVR doesn’t record video when motion detected.
A: 1. Please set “Recording mode” to “Motion Detection”
2. Set “Sensitivity”,“Speed” and “Noise Margin” according to the suggestions on
page 13-14.
Q: Remote control is not working.
A: 1. Check whether remote battery is flat: connect DVR with camera and monitor, press any
buttons on remote, with remote LED facing the camera to see whether there is a spark
in the monitor; if not, please replace a new battery;
2. Remote control only works in open space.
A 1GB to 32GB genuine SD card.