User Guide
1. Choose either effect 1 or 2
2. Use your value buttons to scroll up or down until you reach the desired factory set effect program.
TIP: To scroll up or down very quickly hold down the value button. To limit the scroll speed, simultaneously
push the other value button while scrolling.
SELECTING EFFECT PROGRAMS
SELECTING EFFECT PROGRAMS
ON
INPUT
CLIP
OUTPUT
EFF 1 EFF 2
EFF1 EFF2
BYPASS EFF2EFF1
STEREO
EDIT
VALUE
STEREO
5
4
3
2
1
010
9
8
7
6
5
4
3
2
1
010
9
8
7
6
SAVE
(SHIFT)
(COMPARE)
(GLOBAL)
XP2
TWO ENGINE DSP EFFECTS PROCESSOR
reverb
chorus
delay
rotary
speaker
FACTORY PRESETS
00-19 Plates
20-29 Rooms
40-49 Halls
FACTORY PRESETS
60-64 + Feedback
65-69 - Feedback
FACTORY PRESETS
70-74 + Feedback
75-79 - Feedback
FACTORY PRESETS
50-54 Triangle
55-59 Sine
FACTORY PRESETS
80-89 Misc Delays
FACTORY PRESETS
90-99 Various
EFFECTS PARAMETERS
flanger
phaser
1 2
ON
INPUT
CLIP
OUTPUT
EFF 1 EFF 2
EFF1 EFF2
BYPASS EFF2EFF1
STEREO
EDIT
VALUE
STEREO
5
4
3
2
1
010
9
8
7
6
5
4
3
2
1
010
9
8
7
6
SAVE
(SHIFT)
(COMPARE)
(GLOBAL)
XP2
TWO ENGINE DSP EFFECTS PROCESSOR
1
1
2
for a more detailed list of effects, please see the Effects Algorithms listed on pg.11
1. Push the right EDIT button & BYPASS/SHIFT button (you will now be able to edit)
2. Now use the VALUE buttons to select the desired parameter to be changed.
3. Push the right EDIT button again and use the VALUE buttons to change the value of the parameters.
Please see pg 11 for more on effect parameters. To exit this operation, simply press either of the EFF buttons.
HOW TO CHANGE EFFECT PROGRAMS
HOW TO CHANGE EFFECTS PARAMETERS
press both simultaneously
ON
INPUT
CLIP
OUTPUT
EFF 1 EFF 2
EFF1 EFF2
BYPASS EFF2EFF1
STEREO
EDIT
VALUE
STEREO
5
4
3
2
1
010
9
8
7
6
5
4
3
2
1
010
9
8
7
6
SAVE
(SHIFT)
(COMPARE)
(GLOBAL)
XP2
TWO ENGINE DSP EFFECTS PROCESSOR
1
HOW TO SAVE CHANGES AND/OR SAVE CREATED EFFECT PROGRAMS
press both simultaneously
1. After making adjustments to your effect program, press both EDIT LT and EDIT RT at the same time . The
screen will read Prxx. The "xx" indicates that effect program's number.
To exit this operation without saving, simply press either of the EFF buttons.
2. To complete the save push both EDIT buttons again simultaneously.
6
FOR ADVANCED USERS
See page 10 to enable Expert Mode and how to
re-number the order of the effects parameters !