Item# 11926 Colby 6 Drawer Double Wide Dresser Commode double à 6 tiroirs Colby revised 14SEP2017 Assembly Instructions Manuel d’assemblage 1
Thank you for purchasing a Carter’s nursery product! To ensure safe use of your product, please follow these assembly instructions closely. If you are missing parts or have any questions, please visit our website at www.themdbfamily.com/support. For assembly, use the Allen wrench if it is included in the hardware box. We also recommend using a Phillips head screwdriver (not included) to complete assembly. Please do not substitute parts or use power screwdrivers. Our pieces are made from natural woods.
PARTS • PIÈCES Not to Scale/Pas à l'échelle Side 1 Latéral 1 (Will face right side of dresser) (Vers la droite de la commode) A. Left Side Panel A. Panneau latéral gauche Side 2 Latéral 2 (Will face left side of dresser) (Vers la gauche de la commode) B. Right Side Panel B. Panneau latéral droit C. Middle Panel C. Panneau centre D. Top Panel D. Dessus E. Back Top Rail E. Traverse arrière supérieure H. Bottom Cross Bar H. Traverse arrière I. Back panel (2) I. Panneau arrière (2) F.
L. Drawer bottom (6) L. Fond de tiroir (6) J-A1. Left drawer front (3) J-A1. Façade gauche de tiroir (3) M-1. Left drawer side (6) M-1. Côté gauche de tiroir (6) J-B1. Right drawer front (3) J-B1. Façade droit de tiroir (3) N-1. Right drawer side (6) N-1. Côté droit de tiroir (6) S. Finished Drawer Front Panel (6) S. Façade de tiroir de finition (6) HARDWARE • ACCESSOIRES DE MONTAGE Bolts in Actual Size/Boulons (taille réelle) H1. 1-1/4” Phillips head screw (48) H1.
ASSEMBLY INSTRUCTIONS • INSTRUCTIONS D’ASSEMBLAGE 1 H6 A H5 B 2 H6 C Side 1 C Latéral 1 (Will face right side of dresser) (Vers la droite de la commode) 5
3 H6 H7 E F G H5 H7 H (Facing back) (vers la arrière) 4 H7 (Facing front) H7 (vers la avant) C Side 1 C Latéral 1 (Will face right side of dresser) H6 (Vers la droite de la commode) H5 H7 H6 (Facing back) (Facing front) (vers la arrière) (vers la avant) H * Rotate H6 clockwise to secure. * Tourner H6 dans le sens horaire pour fixer.
5 (Front) H5 (Avant) (Back) H6 H7 (Arrière) F H6 E * Rotate H6 clockwise to secure. * Tourner H6 dans le sens horaire pour fixer.
7 (Front) (Avant) (Back) (Arrière) H6 A H5 H7 H6 D * Rotate H6 clockwise to secure. * Tourner H6 dans le sens horaire pour fixer. 8 (Front) (Avant) (Back) H7 (Arrière) H H6 C H5 A H7 H6 D * Rotate H6 clockwise to secure. * Tourner H6 dans le sens horaire pour fixer.
(Front) (Avant) (Back) (Arrière) B H F H5 H6 A H7 H7 E H6 D * Rotate H6 clockwise to secure. * Tourner H6 dans le sens horaire pour fixer. 10 H5 (Front) (Avant) H6 (Back) (Arrière) H7 G B A C H6 H7 * Rotate H6 clockwise to secure. * Tourner H6 dans le sens horaire pour fixer.
11 H4 H2 I I B A (back) (arrière) 10
12 DRAWER ASSEMBLY INSTRUCTIONS INSTRUCTIONS D'ASSEMBLAGE DES TIROIRS 12a H1 J-A1/J-B1 M-1 H1 N-1 12b J-A1/J-B1 L 11
c H1 L K-1 H1 12d H8 S H8 H9 H9 H9 H9 13 J-A1+S J-B1+S J-A1+S J-B1+S J-A1+S A J-B1+S B 12
(REQUIRED) (OBLIGATOIRE) 14 FURNITURE ANTI-TIPPING KIT INSTALLATION INSTALLATION DU DISPOSITIF ANTIBASCULEMENT Serious or fatal crushing can occur when furniture tips over on children. To help prevent tip-over, follow the steps below to install this anti-tipping strap. Le basculement du meuble sur un enfant peut entraîner des blessures graves ou fatales par écrasement. Pour aider à prévenir le basculement, suivre les étapes ci-dessous afin d'installer cette sangle antibasculement.
ASSEMBLY INSTRUCTIONS • INSTRUCTIONS D’ASSEMBLAGE 14a 2” x 4” wall stud Montant de mur de 2" x 4" Locate a 2” x 4” stud behind the wall, and make a mark. Localiser un montant de 2” x 4” derrière la surface du mur et faire une marque. 14b Install the strap on the wall with long screw and washer. Fixer la sangle au mur avec la vis longue et une rondelle. 14c Install the other end of strap on the back of dresser with short screw and washer into the wood framing of the dresser.
Finish Terminé READ ALL INSTRUCTIONS BEFORE USING THE PRODUCT. KEEP THE INSTRUCTIONS FOR FUTURE USE. Recheck all screws and bolts to be sure they are fastened securely. Do not overtighten. LISEZ ATTENTIVEMENT TOUTES LES INSTRUCTIONS AVANT D’UTILISER CE PRODUIT. CONSERVER CES INSTRUCTIONS POUR UN USAGE ULTÉRIEUR. Procéder à une nouvelle vérification des vis et des boulons pour vous assurer qu’ils sont bien fixés. Ne pas trop serrer. CHANGER TRAY IS NOT INCLUDED, SOLD SEPARATELY.
Storage: • Pine woods exchange moisture with the air adjusting to major changes in room temperature and humidity. Therefore, it is best to place your furniture away from heating or air-conditioning vents. • Sunlight is not friendly to solid wood furniture and prolonged direct exposure to harsh sunlight can discolor the finish. Be careful not to place your furniture in direct sunlight for extended periods of time. As with all your fine furniture, blot up spills immediately.