User's Manual

AG501 cs5cal (PD-02.05)
Page 8 of 11
After closing the dialog you can find an overview of the calibration results in the cs5cal-window.
Information on defective sensors is attached at the bottom of the calibration results (Fig. 16).
The information is stored in the calibration protocol (see Check the calibration result II.D.7).
Fig.16: Calibration protocol with results and information on defective sensors
6. Pack the calibration data
If you want to send the calibration information for analysis purposes, please click the "pack calibration
data" button (Fig. 17). Otherwise, click close and the calibration is finished.
Fig. 17: Create an archive file (*.tbz) if desired...
The "pack calibration data" button will create an archive file (*.tbz) in the /data/calibration
folder. The name of this archive is the same as the name of the calibration set with the extension *.tbz.
Calibration results
Defective sensors