User's Manual

AG501 cs5cal (PD-02.05)
Page 7 of 11
4. Wait until the data recording is done
The calibration may take up to 20 minutes! The user is informed about its end by an info window.
Step 1
Step 2
Step 3
Step 4
Step 5
Wait until this window
appears
5. Calibration has finished
In case of defective or missing sensors in a calibration, the concluding dialog informs about how many
sensors were calibrated successfully, and for which sensors and why calibration failed (Fig. 15).
Fig.15: If applicable, the concluding dialog informs about defective or missing sensors