User's Manual

AG501 cs5cal (PD-02.05)
Page 4 of 11
D. Starting cs5cal
1. Enter the name of the calibration set
You will be asked for the name of the calibration set. A folder with this name will be created
(/data/calibration/). This folder becomes the calibration set. It will also contain a file with this
name and the extension ".calset".
Enter a unique name. According to the common rules for file names, it must not contain any special
characters.
Thus, *#&$~\[]()`<>|,.^". and spaces are not allowed.
Fig.10: Enter the name for the calibration set