User's Manual

AI-07.01

Controlserver network settings for eBox

Page 1 of 3

AG501

Controlserver

Configure controlserver network settings for eBox-connection

Step-by-step tutorial

1. Connect the controlserver to the AG501 via the yellow LAN-cable (Figure 1).

Figure 1: E-Box and Control Server cable connections

2. Right-click on the LAN-icon in the top right corner (Figure 2-1) and select

Edit

Connections

in the drop-down menu (Figure 2-2).

Figure 2: Edit network connections

Yellow LAN cable

PAGE 1
AI-07.01 Controlserver network settings for eBox Page 1 of 3 AG501 Controlserver Configure controlserver network settings for eBox-connection Step-by-step tutorial 1. Connect the controlserver to the AG501 via the yellow LAN-cable (Figure 1). Yellow LAN cable Figure 1: E-Box and Control Server cable connections 2. Right-click on the LAN-icon in the top right corner (Figure 2-1) and select Edit Connections in the drop-down menu (Figure 2-2).
PAGE 2
Controlserver network settings for eBox (AI-07.01) Page 2 of 3 3. Select System em1 (Figure 3-1) and click on Edit (Figure 3-2). 2 1 Figure 3: Edit connection System em1 4. Select the IPv4 Settings tab (Figure 4-1) and configure the settings as shown in Figure 4. Click Routes (Figure 4-2) to configure the routing.
PAGE 3
Controlserver network settings for eBox (AI-07.01) Page 3 of 3 5. Check the Use this connection… as shown in Figure 5 and click OK. Figure 5: Editing IPv4 routes for System em1 6. Click Apply (Figure 4-3) and type in the controlserver root-password to authenticate (Figure 6). The new settings will be applied. Figure 6: Authenticate with CS-root-password 7. Reboot the controlserver.