User Manual

Mounting Optic to BoaPod
The BoaPod comes with a removable 360° fluid ballhead with 1/4 universal mounting
screw.
For Use With Ballhead
Screw optic, camera or adapter to thread on top of ball head until tight. To adjust
position of ball head, loosen lock by turning counter-clockwise (Fig. 5). Rotate ball
head as desired (Fig. 6) and tighten securely.
TM
Fig. 5 Fig. 6
For Use Without Ballhead
Ball Head can be removed by twisting counter-clockwise (Fig. 7). Y
ou can then
mount optic, camera or adapter directly to tripod. Turn circul
ar knob counter
clockwise to tighten (Fig. 8). To remove, turn circular knob c
lockwise.
Fig. 7
Fig. 8
IMPORTANT:
• Do not exceed max load capacity of tri
pod.
• Remove optic before setting up, taking down, adjusting or transporting your
tripod.
• Make sure optic is securely fastened to tripod.
• Do not over-tighten locks as this
may damage the locking mechanisms.