User Manual
As light travels through a roof prism binocular, it becomes slightly out of phase. This aects the color
balance and delity. Your 3D binoculars are phase coated to correct this problem, forcing the light back
into phase and therefore resulting in more accurate color reproduction.
Attaching the Neck Strap
All 3D binoculars come with both a neck strap and a shoulder harness. You can choose either accessory
to hold your binocular depending on your personal preference.
To attach the neck strap:
1. Thread the end of the strap up through the strap clip on the side of your binocular.
2. Thread the strap through the rst loop of the plastic strap piece.
3. Continue to thread the strap through the second loop of the plastic strap piece.
4. Adjust the strap to the desired length and pull tight.
5. Slide the plastic cu over the loose end of the neck strap.
5