Instructions for use

GB // 18

1 2

NOW YOU CAN SET OFF ON YOUR TRAVELS

Avoid continuous running. Allow the motor to cool down approxi-

mately 30 minutes after running.

Attention!

Switch on transmitter first, then switch on RC model. Make sure to

follow this order when turning on your RC model.

Never run the model on public roads or streets, as it could endan-

ger traffic.

LOAD PLATFORM

The load platform can be controlled

using the transmitter:

To tip the load platform, push the

right control lever up.

After unloading, push the lever back

down. The load platform will return to

its original position.

Right

control lever

ROPE WINCH

First activate the rope winding func-

tion on the underside of the chassis.

Then push the left control lever to the

right to unwind the rope.

The control lever must then be

pushed to the left to wind the rope

back in again.

Left

control lever

CAUTIONS WHEN OPERATING THE RC MODEL

• Never run the model in crowded areas, near or toward people

or animals, to prevent property damage and/or personal injury.

• Never run the model on grassland. Twining grass may hinder

axle rotation and may cause motor heat buildup.

• Never run the model near rivers, ponds or lakes as to prevent

RC model from dropping into the water.