Operating instructions

SC-411HS-20 Installation and Operating Instructions Page 9 of 16
CP5122A 4/1/14
Option Set 3
(Alert, siren/lever video)
S1 (Alert Enable) - Alert provides a periodic “beep” at the control head to
remind that a light is on. Turn off to disable this feature.
S2 (PrimarySiren Video) - VIDEO output is normally on when a Primary
button and/or Siren is active. Press button to disable. (NOTE: this does
not control the VIDEO Output for S1 - S6. See S1 - S6 Operation)
S3 (Center Only) - Only CTR-A output is on when center arrow stick
selected.
S4 (Instant On) - Primary buttons operate even when ENABLE input is
off. Arrow stick buttons active when Primary button active.
Press the DIM button momentarily to move into next section, or DIM for 3
seconds to save & exit.
NOTE: These option settings can be easily transferred to another vehicle. See PROGRAM TRANSFER.
3
Primary button 3 light blinking
Momentarily press button
S1 - S4 to change.
S1 S2 SWITCH
Alert
Primary/
Siren Video
FUNC-
TION
ON - Alert
Active
OFF -
Disable
ON - Lever/
Siren Video
OFF -
Disable
OPTIONS
(Top is
default)
S4
Instant
On
OFF
ON
S3
Center
Only
OFF
ON
Alert
Primary/
Siren
Video
Center
Only
Instant
On