Operating instructions

SC-411HS-20 Installation and Operating Instructions Page 7 of 16

CP5122A 4/1/14

S1 - S6 Switch Operation

Primary buttons 1, 2 & 3 all lighted

Change each switch’s operation by momentarily pushing the button.

See the table below for button status definition.

1. Light ON - Push On / Push Off with video output trigger active

(default)

2. Light OFF - Push On / Push Off with video trigger output deactivated.

3. Light flashing continuously - Momentary.

4. Light flashing with double pulse - Timed Momentary (Gun Lock Timer)

for duration of 10 seconds.

5. Light flashing with triple pulse - Timed Momentary (Gun Lock Timer)

for duration of 20 seconds.

6. The options will cycle through and repeat with each push of the but-

ton.

Note: Timed Momentary (Gun Lock Timer) is not be available for Primary

Button linkage.

Primary Button / S1 - S6 Button Linkage

Primary buttons set to 1, 2 or 3 —> 1, 2 or 3 lit

Press the desired auxiliary switch to turn on or off the light, linking it to the

lever switch position.

NOTE: Timed Momentary (Gun Lock Timer) programmed switches can-

not be used.

Press the DIM button momentarily to move into next section, or DIM for 3

seconds to save & exit.

1 2 3

3 2 1