Operating instructions

Page 16 of 16 Installation and Operating Instructions SC-411HS-20
4/1/14 CP5122A
INSTALLATION CONFIGURATION RECORD
Terminal AWG Color Connected to Terminal AWG Color Connected to
POS (2) L1
GND (2) L2
POWER L3
RADIO (2) S1
BACKLIT S2
LITCTRL S3
SIRCTRL S4
CUTOUT S5
SPKR S6
SPKR RGT-A
NC X X X LFT-A
VIDEO CTR-A
Installed by: Date:
S1—S6 Operation:
Blank=Default, V=No Video, M=Momentary, 10 or 20=Hold Time
Primary Button / S1 - S6 Switch Linkage: Blank=None, #=Pos
S1 S2 S3 S4 S5 S6
Operation
Association
Option Set 1
Option Default Setting
Cutout Input POS POS NEG OFF
Siren Control POS POS NEG OFF
Light Control POS POS NEG OFF
Timed Override OFF ON OFF
Sweep/Intersection OFF ON OFF
Automatic Siren ON ON OFF
Option Set 2
Two-Tone OFF ON OFF
Phaser Enable ON ON OFF
Short Manual OFF ON OFF
Horn Enable ON ON OFF
Primary Progressive ON ON OFF
Non-Prog Override OFF ON OFF
Option Set 3
Alert Enable ON ON OFF
Primary/Siren Video ON ON OFF
Center Only OFF ON OFF
Instant On OFF ON OFF
General Information
Vehicle ID
Handheld Ctrl S/N
Amplifier S/N
Notes: