Specifications

www.carsonsirens.com
1.888.577.6877


• HA-100 Wire Harness
• SP-200 Switch Panel
• SP-200 Wire Harness
To find a  Dealer near you, go to our website at www.carsonsirens.com and click on the “Siren Dealers” link
Due to continuous improvements, we reserve the right to change any specification and/or information contained in this brochure at any time
without notice.
Stutter Horn Amp, Stutter Horn System and  are trademarks of Carson Manufacturing Company, Inc.

HA-15 0-10 14
unDEr hooD stuttEr horn amP
HA-10 0-10 14
in-cab stuttEr horn amP
 Single 100W 11 ohm
 9-16VDC (-ground)
 8AMPS @ 14VDC
 105W RMS Max (@ 15VDC single 100W speaker)
 NA 16-18VDC output ceases to protect horn, resumes when at normal level
 50AMPS Minimum from supply circuit (supply circuit must supply for 1 second)
 -22F to +200F -15F to 140F
 Vehicle horn ring or separate switch (customer supplied)
 4 wire leads: positive with in-line fuse, negative, 2 speaker 4 Pin removable terminal block: positive, negative, 2 speaker
 1½” H x 4⅛” W x 2⅛” D
1


” H x 4¼” W x 3⅝” D
 1 LB
23
chart
Specs
All Carson sirens are intended for use by authorized personnel only. It is the user’s responsibility to ensure they understand and operate this emergency warning device
in compliance with all applicable city, state and federal laws and regulations.