Specifications



SA-44 1M-17F
magforcE mEch
SA-43 0M-17F
Patriot mEch
SA-40 0M-17 14
classic mEch
SA-50 0M-27 14
cruisEr mEch
 11-16VDC (-ground) 9-16VDC (-ground)
 17AMPS @ 14VDC 8AMPS or 16AMPS @ 14VDC
 <250mA <150mA
 200Hz-10kHz +/- 3db
 <3% (@ 1kHz dual 100W speakers) <3% (@ 1kHz single 100W speaker)
 80W (@ 14VDC dual 100W speakers) 40W (@ 14VDC per 100W speaker)
 0.75VRMS Min, 400 ohms nominal

210W RMS Max
(@ 15VDC dual 100W speakers)
105W RMS Max (@ 15VDC single 100W speaker)
180W RMS Max (@ 15VDC dual 100W speakers)
 700Hz-1500Hz
 Mech = 6 CPM, Wail = 13 CPM, Yelp = 190 CPM, Phaser = 15 CPS, Two-Tone = 60 CPM
 16-18VDC siren output ceases to protect speaker, resumes when at a normal level
 50AMPS Minimum from supply circuit (supply circuit must provide for 1 second until fuse blows)
 -15F to 140F

Control: 6 Position rotary, push-button for
Horn and Manual, PA volume control,
dual tone toggle, +/- auxiliary input
Amplifier: Radio volume adjust, DIP
switch options
Control: 6 Position rotary, push-button
for Horn and Manual, PA volume control,
+/- auxiliary input
Amplifier: Radio volume adjust, cutout
input for +/- latching operation, DIP
switch options
6 Position rotary, push-button for Manual
and Horn, PA volume control, radio vol-
ume adjust, +/- auxiliary input, and
DIP switch options
4 Position rotary, push-button
Horn, push-button Manual/Phaser,
+/- auxiliary input, PA and Radio
volume control, cutout input for +/-
latching cutout operation, and DIP
switch options

Control: 5 Pin connector with #22 AWG
leads: positive, negative, control output,
backlighting input, and auxiliary input
Amplifier: 10 Pin connector: 2 positive, 2
negative, 3 speaker, 2 radio, and control
input
Control: 5 Pin connector with #22 AWG
leads: positive, negative, control output,
backlighting input, and auxiliary input
Amplifier: 10 Pin connector: 2 positive,
2 negative, 2 speaker, 2 radio, control
input and cutout input
9 Pin connector: 2 positive, 2 negative,
2 speaker, 2 radio, cutout, auxiliary
10 Pin connector: 2 positive, 2
negative,
2 speaker, 2 radio, cutout, auxiliary

Control: 6¼”W x 2⅞”H x 1”D
Amplifier: 8”W x 2⅛”H x 6¾”D
Control: 6¼”W x 2⅞”H x 1”D
Amplifier: 8”W x 2⅛”H x 6¾”D
6⅛”W x 2½”H x 5⅜”D 6⅛”W x 2⅛”H x 5⅞”D
 6 LBS 5½ LBS 4½ LBS
 Class A and SAEJ1849 Sound Level & KKK for Ambulance
21
www.carsonsirens.com
1.888.577.6877
chart
Specs
All Carson sirens are intended for use by authorized personnel only. It is the user’s responsibility to ensure they understand and operate this emergency warning device
in compliance with all applicable city, state and federal laws and regulations.