Specifications



SA-44 1-10F
magforcE
SC-41 1-RS-10F
ElitE forcE
SA-43 0-10F
Patriot
SA-40 0-10 14
classic
 11-16VDC (-ground) 9-16VDC (-ground)
 17AMPS @ 14VDC 8AMPS or 16AMPS @ 14VDC
 <250mA <340mA <150mA
 200Hz-10kHz +/- 3db
 <3% (@ 1kHz dual 100W speakers) <7% (@ 1kHz single 100W speaker) <3% (@ 1kHz single 100W speaker)
 80W (@ 14VDC dual 100W speakers) 40W (@ 14VDC per 100W speaker)
 0.75VRMS Min, 400 ohms nominal

210W RMS Max
(@ 15VDC dual 100W speakers)
105W RMS Max (@ 15VDC single 100W speaker)
180W RMS Max (@ 15VDC dual 100W speakers)
 700Hz-1500Hz

Wail = 13 CPM, Yelp = 190 CPM,
Phaser = 15 CPS, Two-Tone = 60 CPM
Horn = 109 CPS, Wail = 15 CPM,
Yelp = 210 CPM, Phaser = 15 CPS,
Two-Tone = 60 CPM
Wail = 13 CPM, Yelp = 190 CPM, Phaser = 15 CPS, Two-Tone = 60 CPM
 16-18VDC siren output ceases to protect speaker, resumes when at a normal level
 50AMPS Minimum from supply circuit (supply circuit must provide for 1 second until fuse blows)
 -15F to 140F

Control: 6 Position rotary, push-button for
Horn and Manual, PA volume control,
dual tone toggle, +/- auxiliary input
Amplifier: Radio volume adjust, DIP
switch options
6 Position rotary, push button Horn, push
button Manual and Timed Override, noise
canceling microphone, PA volume control,
external radio volume control, auxiliary
input for +/- Horn, Manual, HRC2, or
Sweep operation, cutout input for +/-
latching cutout operation, face program-
mable option selection
Control: 6 Position rotary, push-button
for Horn and Manual, PA volume control,
+/- auxiliary input
Amplifier: Radio volume adjust, cutout
input for +/- latching operation, DIP
switch options
6 Position rotary, push-button for
Manual and Horn, PA volume control,
radio volume adjust, +/- auxiliary
input, and DIP switch options

Control: 5 Pin connector with #22 AWG
leads: positive, negative, control output,
backlighting input, and auxiliary input
Amplifier: 10 Pin connector: 2 positive,
2 negative, 3 speaker, 2 radio, and
control input
12 Pin connector: 2 negative, 2 speaker,
2 radio cutout, 2 auxiliary input, 3 enable,
and dimming input
Control: 5 Pin connector with #22 AWG
leads: positive, negative, control output,
backlighting input, and auxiliary input
Amplifier: 10 Pin connector: 2 positive,
2 negative, 2 speaker, 2 radio, control
input and cutout input
9 Pin connector: 2 positive, 2 nega-
tive,
2 speaker, 2 radio, and auxiliary input

Control: 6¼”W x 2⅞”H x 1”D
Amplifier: 8”W x 2⅛”H x 6¾”D
Control Head: 6⅛”W x 2⅝”H x 1¼”D
Amplifier: 8¼”W x 8⅝H ” x 2⅛”D
Control: 6¼”W x 2⅞”H x 1”D
Amplifier: 8”W x 2⅛”H x 6¾”D
6⅛”W x 2½”H x 5⅜”D
 6 LBS 7 LBS 5½ LBS

Class A and SAEJ1849 Sound Level,
California Title 13 Configurable & KKK for
Ambulance
Class A Sound Level,
California Title 13, KKK
Class A and SAEJ1849 Sound Level, California Title 13 Configurable & KKK for
Ambulance
www.carsonsirens.com
1.888.577.6877


SC-41 1-RS-10F
ElitE forcE
 9-16 VDC (- ground)

4 Position lever switch with LED indica-
tors, 8 push buttons
 20 AMPS per circuit, 50 AMPS total
 10 AMPS per circuit, 30 AMPS total

3 pin connector with exposed fuses, 10
pin connector (9 for light controls and
1 for video output) with exposed fuses,
& 2 screw down terminal for positive #6
AWG wires
19
chart
Specs
All Carson sirens are intended for use by authorized personnel only. It is the user’s responsibility to ensure they understand and operate this emergency warning device
in compliance with all applicable city, state and federal laws and regulations.