Specifications
SC-41 1-RD-10 14
ElitE forcE
SC-40 9-10 14
commanDEr
SC-55 0-10 14
stEalth
SC-40 7-10 14
EnforcEr
9-16VDC (-ground) 11-16VDC (-ground) 9-16VDC (-ground)
16AMPS @ 14VDC 8AMPS or 16AMPS @ 14VDC
<340ma <300mA <200mA <300mA
200Hz-10kHz +/- 3db
<7% (@ 1kHz single 100W speaker) <3% (@ 1kHz single 100W speaker)
40W (@ 14VDC per 100W speaker)
0.75VRMS Min, 400 ohms nominal
210W RMS Max
(@ 15VDC dual 100W speakers)
105W RMS Max (@ 15VDC single 100W speaker)
180W RMS Max (@ 15VDC dual 100W speakers)
700Hz-1500Hz 700Hz-1450Hz
Horn = 109 CPS, Wail = 15 CPM,
Yelp = 210 CPM, Phaser = 15 CPS,
Two-Tone = 60 CPM
Horn = 109 CPS , Wail = 13 CPM, Yelp = 190 CPM, Phaser = 15 CPS,
Two-Tone = 60 CPM
Horn = 109 CPS , Wail = 15 CPM,
Yelp = 210 CPM,
Phaser = 15 CPS, Two-Tone = 60 CPM
16-18VDC siren output ceases to protect speaker, resumes when at a normal level
50AMPS Minimum from supply circuit (supply circuit must provide for 1 second until fuse blows)
-15F to 140F
6 Position rotary, push button Horn,
push button Manual and Timed
Override, noise canceling microphone,
PA volume control, external radio vol-
ume control, auxiliary input for +/- Horn,
Manual, HRC2, or Sweep operation,
cutout input for +/- latching cutout opera-
tion, face programmable option selection
6 Position rotary, push-button Horn,
push-button Manual, attached noise
canceling microphone, PA volume con-
trol, Radio volume adjust, +/- auxiliary
input, cutout input for +/- latching cutout
operation, DIP switch options (See Light
Control Specs)
Control: 6 Position rotary, push-button
for Horn and Manual, Power/PA volume
control Amplifier: Radio volume adjust,
+/- auxiliary siren input, cutout input for
+/- latching cutout operation, DIP switch
options (See Light Control Specs)
3 Position siren rocker, 3 position power
rocker, push-button Horn, push-button
Manual/Phaser, PA and Radio volume
control, +/- auxiliary input, and cutout
input for +/- latching cutout operation
(See Light Control Specs)
12 Pin connector: 2 negative, 3 speaker,
2 radio cutout, 2 auxiliary input, 3
enable, and dimming input
12 Pin connector: 2 positive, 2 negative,
2 speaker, 2 radio, cutout, auxiliary
input, enable & video trigger
Control: Connected to amplifier with
coiled cable Amplifier: 10 Pin connector:
2 negative, 2 speaker, 2 radio, 2 out-
puts, cutout and auxiliary
10 Pin connector: 2 positive, 2 negative,
2 speaker, 2 radio, cutout and auxiliary
Control: 6⅛”W x 2⅝”H x 1¼”D
Amplifier: 8¼”W x 8⅝”H x 2⅛”D
6⅛”W x 2¾”H x 8”D
Control: 2¾”W x 6”H x 1”D
Amplifier: 7½”W x 2⅛”H x 6¾”D
6⅛”W x 2⅞”H x 5⅞”D
7 LBS 6 LBS 5 ½ LBS
Class A Sound Level,
California Title 13, KKK
Class A Sound Level
California Title 13 Configurable, KKK for
Ambulance
Class A and SAEJ1849 Sound Level
California Title 13 Configurable
Class A and SAEJ1849 Sound Level,
California Title 13 Configurable, KKK for
Ambulance
SC-41 1-RD-10 14
ElitE forcE
SC-40 9-10 14
commanDEr
SC-55 0-10 14
stEalth
SC-40 7-10 14
EnforcEr
9-16 VDC (- ground) 11-16 VDC (- ground) 9-16 VDC (- ground)
4 Position lever switch with LED indica-
tors, 8 push buttons
4 Position lever switch with LED indica-
tors and an optional auto siren in the last
position & 6 membrane push buttons for
auxiliary device control
4 Position slide with optional auto siren
in the last
position & 4 membrane push buttons for
auxiliary device control
4 Position lever with LED indicators and
an optional auto siren in the last position
& 4 illuminated on/off rockers
20 AMPS per circuit, 50 AMPS total 20 AMPS per circuit, 60 AMPS total 30 AMPS per circuit, 60 AMPS total
10 AMPS per circuit, 30 AMPS total 20 AMPS per circuit, 80 AMPS total 20 AMPS per switch, 80 AMPS total
3 pin connector with exposed fuses, 10
pin connector (9 for light controls and 1
for video output) with exposed fuses, &
2 screw down terminal for positive #6
AWG wires
3 Screw down terminals with exposed
fuses, 6 pin connector with exposed
fuses, & 2 #10 AWG wires for power
7 Fused pressure terminal outputs & 2
pressure
terminals for up to 2 #6 AWG wires for
power
8” Minimum wire leads, lever - (1) #10
AWG input and (3) #14 AWG outputs,
rockers - (1) #14 AWG input and (1) #14
AWG output per switch, EXTERNAL
FUSING REQUIRED
www.carsonsirens.com
1.888.577.6877
chart
Specs
18
All Carson sirens are intended for use by authorized personnel only. It is the user’s responsibility to ensure they understand and operate this emergency warning device
in compliance with all applicable city, state and federal laws and regulations.