Instruction manual

89CARSON Reflex Wheel Ultimate Touch 500500516
D
USB function
Description:
• None: the USB interface can be used only to
charge the battery of the transmitter.
•
FS-iT4 emulator: when connected to a computer,
the transmitter acts as a standard HID with 4 axes
(one for each channel) and 3 switches (SW1, SW2
and SW3) and can be used as the main controller
in any compatible simulation software.
Operation:
1. Connect the transmitter to the computer by the
Micro USB cable.
2.
Switch on the transmitter, then touch “system------”
”USB function------” ”FS-iT4 simulator“. After that,
the computer will automatic identify the HID.
3. In the computer control panel, double click
„game controller“--------”FS-iT4 emulalor” to test
whether the simulating function is ok.
About FS-iT4
Touch ‘About FS-IT4’, and the version of the current
firmware will be shown like the picture on the right.
Touch the „OK” button to go back.