Instruction manual

CARSON Mini Tyrann Pro 260 • 50 050 7038

5. Nick sensitivity – Expert mode

Hold down the nick/roll stick for 1 second to enter the setting status.

Press throttle/tail rotor key until the five-point dotted line symbol

starts to flash (see picture beside). Press nick trim to set the sensitivity

and then hold down the nick/roll stick for 1 second to confirm and

exit.

6. Roll sensitivity – Expert mode

Hold down the nick/roll) stick for 1 second to enter the setting status.

Press the throttle/tail rotor key until the five-point dotted line symbol

starts to flash (see picture beside). Press roll trim to set the sensitivity.

And then hold down the nick/roll stick for 1 second to confirm and

exit.

g. Battery Mounting

Flashing

Caution:

• Do not mix old and new batteries/rechargeable batteries.

• Do not mix different types of batteries.

• Do not charge non-rechargeable batteries.

1 3

Release the screw. Take away the battery cover. According to the correct polarities, install

4 x AAA batteries.

Return the cover. Fasten the screw.

Pull

Push