Instruction manual

CARSON Mini Tyrann Pro 260 • 50 050 7038

d. Input Key Function

e. Reversing Channel Setup

S/N Identification Function

1 Throttle/Tail rotor stick Forward and backward movement of the stick makes the helicopter ascend and descend

respectively. Left and right movement of the stick will rotate the helicopter’s fuselage left/

right respectively.

2 Nick/roll stick Forward and backward movement of the stick makes the helicopter move forward and

backward respectively. Left and right movement of the stick makes the helicopter drift

sideways left/right respectively.

3 Roll trim Aileron trim subsidiary adjusts left and right drift.

4 Nick trim Elevator trim subsidiary adjusts forward and backward movement.

5 Tail rotor trim Rudder trim subsidiary adjusts left and right rotation.

6 Throttle trim Throttle trim subsidiary adjusts ascent and descent.

7 On/Off power switch Pushing up switches on the power transmitter, pulling down

switches it off.

8 Antenna Transmits wireless signal

1. Nick reverse setup

Hold down the nick/roll stick for 1 second to enter the setting status.

Press nick trim key up or down to choose reverse. And then hold down

the nick/roll stick for 1 second to confirm and exit.

2. Roll reverse setup

Hold down the nick/roll stick for 1 second to enter the setting status.

Press the roll trim key left or right to choose reverse. And then hold

down the nick/roll stick for 1 second to confirm and exit.

3. Rudder (tail rotor) setup

Hold down the nick/roll stick for 1 second to enter the setting status.

Press rudder trim key left or right to choose reverse. And then hold

down the nick/roll stick for 1 second to confirm and exit.

M1 M2