User manual

27 // GB
Model slips (drifts) forward:
• Reducethespeedandpushthetrimsliderofthenickfunction
on the right remote control lever stepwise backwards.
• Pushthepitchleverforwardagainandcheckwhetherthiswas
sufficient for correction, if necessary shift the trim further to the
left.
• Repeattheprocessuntilthequadcopternolongershowsa
tendency to drift forwards.
Model slips (drifts)
backwards:
• Proceedasdescribedabove,
but push the trim slider of the
nick function stepwise forward.
Trimming the quadcopter
Already shortly before the quadcopter takes off, you can recognize
whether it wants to turn or glide in a particular direction. Correct
the deviations from the vertical ascent with the trim knob of the
turn function.
Tip of the fuselage turns to the right:
• Reducespeedandpushthetrimslideroftheturnfunctionon
the left remote control lever stepwise to the left.
• Pushthepitch-leverforwardagainandcheckwhetherthe
correction was sufficient, if necessary shift the trim further to
the left.
• Repeattheprocessuntilthequadcopternolongershowsa
tendency to turn to the right.
Tip of the fuselage turns to the left:
• Proceedasdescribedabove,butpushthetrimslideroftheturn
function stepwise to the right.
FLIGHT OPERATION