User manual

GB // 24
photo/video
CONTROL MODE
This setting mode enables you to switch between Mode 2 and
Mode 4.
Mode 2: Rotation of the helicopter is on the left-hand joystick
Mode 4: Rotation of the helicopter is on the right-hand joystick
Switching between Mode 2 and Mode 4
• Switchoffthetransmitter.
• Keepthecontrolmodebutton(illustration)pressed.
• Switchonthetransmitter
• Releasethebutton
• TransmitterswitchesbetweenMode2andMode4
• Checkthefunctiononthegroundbeforeflying
INSERTING THE MEMORY CARD NOT INCLUDED
TAKING PHOTOS/VIDEOS
Taking photographs:
Keep the photo/video button on the transmitter pressed for seve-
ral seconds to take an individual picture (photo).
The status LED on the helicopter changes. Blue lights up conti-
nuously and red flashes briefly.
Video recording:
Briefly press the photo/video button on the transmitter to start
recording a video clip and finish.
The status LED on the helicopter changes. Blue and red light up
continuously.
Reading the SD card:
Switch the camera off and then remove the SD card.
Now you can view and edit the images and video footage on the
computer.
Control Mode
Push the micro SD card (not included) into the card slot as shown
in the illustration.
The card clicks into place. If you push the card a second time, it
slides back out again. The flight battery must not be connected to
the model when inserting or removing the SD card.