SDS

Page 4 of 9
Issuing date: December 11, 2018
Avoid mechanical or electrical abuse. Storage preferably in cool, dry and ventilated area, which is subject to little temperature
change. Storage at high temperatures should be avoided. Do not place the battery near heating equipment, nor expose to direct
sunlight for long periods.
Incompatible substances or mixtures: No relevant information.
Packing material: Blister card.
8. Exposure controls/personal protection
Control parameters: (for contact with leakage from rupture)
Ingredients
OSHA PEL-TWA
ACGIH TLV-TWA
Manganese dioxide (CAS: 1313-13-9)
5 mg/m
3
(Ceiling limit)
0.1mg/m
3
Graphite (CAS: 7782-42-5)
15 mg/m
3
(Total dust)
5 mg/m
3
(Respirable fraction)
2mg/m
3
Cadmium (CAS: 7440-43-9)
No data available
0.01 mg/m
3
(total)
0.002 mg/m
3
(resp.)
Lead (CAS: 7439-92-1)
No data available
0.05 mg/m
3
Mercury (CAS: 7439-97-6)
0.1 mg/m
3
0.025 mg/m
3
(elemental and
inorganic)
Engineering Control (for contact with leakage from rupture):
Use this product only in closed systems fully or with local exhaust ventilation.
Install washer eyes and safety showers near to the handling and storage area.
Shows the location of these facilities, with a clear and prominent warning board.
Personal Protective Equipment (for workers):
Protection of Hands:
Not necessary under conditions of normal use.
Recommend wearing protective gloves for industrial hygienic purpose (for contact with leakage from rupture).
Protection of Eyes:
Not necessary under conditions of normal use.
Wear safety glasses when working in a dusty environment or liquid may splash (for contact with leakage from rupture).
Respiratory Protection:
Not necessary under conditions of normal use.
Wear appropriate respirators when vapor or fume is generated from processing (for contact with leakage from rupture).