On scale EXCAVATOR model with 2.4G Radio control system. Hidden antenna on EXCAVATOR & remote controller. Aged decoration-traces of oil,rusted,mudded. Full digital proportional control Working platform turn left & right 360 degrees freely. Body spin 360 degrees freely. Climb up to 20 degrees. lndividual track control.
1. Turn screw anti-clockwise on baftery door under EXCAVATOR to open. 2. Plug with fully charged battery pack on socket in battery compartment- 3. Cover the battery door and tighten the screw clockwise. 4. Activate EXCAVATOR by sliding switch to 'ON" REMARKS: Charge the battery pack 6 hours for the tirst time, 4 hours from 2'time. 1. Slide remote controller power switch to "ON". LED luminated to Red. 2. Slide EXCAVATOR power switch to "ON'. 3. Press "[4ATCHING" button on top deck of EXCAVATOR.
R3 R2 R1 POWER INDICATOR ry Forward by pushing both joystick to the front. Left turn by pushing leftjoystick to front. Backward by pushing both joystick to the back. Right turn by pushing rightjoystick to front.
Left spin by pushing leftjoystick to front and rightjoystick to back. Right spin by pushing rightjoystick to ftont and left joystick to back. \ / Working plattorm left turn by pressing (L1) button. N4ain arm tilt up by pressing (L2) button. Working platform right turn by pressing (R1) button. Main arm tilt down by pressing (R2) butlon.
Dipper arm move up by pressing (L3) button. { image attached} Bucket move up by pressing (L4) button. { image attached} @ 1. Check the battery connection on remote controller or replace with new battery. 2. check the battery connection inside EXCAVATOR batlery compartment or recharge battery. 3. Repeat matching procedure by switching remote and EXCAVATOR on again. Press the matching button. 4. Contact us at our Email: info@hobbyengine.com.hk Dipper arm move down by pressing (R3) button.
l€B?T" HOBBY ENGINE C€t# E FCI
