Safety data sheet

SAFETY DATA SHEET according to Regulation (EU) 2015/830
Date of issue 09/02/2017
Updated first edition
Replaces the release of -
Trade name Item-No. 500908141 Carson Paint Killer Spray / Paint Remover 200ml
Manufacturer/Distributor DICKIE-TAMIYA Modellbau GmbH & Co. KG, D-90765 Fürth
Page 4 of 8
isobutane
EC No 200-857-2 CAS No 75-28-5
AGW 1,000 ml/m
3
(ppm) – 2,400 mg/m
3
Peak limit
Factor of exceeding 4(II)
Remarks DFG
propane
EC No 200-827-9 CAS No 74-98-6
AGW 1,000 ml/m
3
(ppm) – 1,800 mg/m
3
Peak limit
Factor of exceeding 4(II)
Remarks DFG
ethyl acetate
EC No 205-500-4 CAS No 141-78-6
AGW 400 ml/m
3
(ppm) – 1,500 mg/m
3
Peak limit
Factor of exceeding 2(I)
Remarks DFG, Y
Components with workplace exposure limits (TRGS 903 Germany)
1-methoxy-propan-2-ol
EC No 203-539-1 CAS No 107-98-2
BGW 15 mg/l
Parameter 1-methoxy-propan-2-ol
Testing material urine
Date of sampling end of exposure, resp. end of shift.
8.2 Exposure controls
Personal protective equipment
General protective and hygienic measures
Wash hands before breaks and at the end of workday.
Respiratory protection Not necessary if room is well-ventilated.
Hand protection The glove material must be impermeable and resistant to the product.
Selection of the glove material on consideration of the penetration times, rates of
diffusion and the degradation.
Material of gloves
Butyl rubber, recommended thickness of the material: ≥ 0,5 mm
The selection of the suitable gloves does not only depend on the material, but also
on further marks of quality and varies from manufacturer to manufacturer. As the
product is a mixture of several substances, the resistance of the glove material can
not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material
Value for the permeation: Level ≤ 6
The exact break through time has to be found out by the manufacturer of the
protective gloves and has to be observed.
Eye protection Wear tightly closing eye protection.
Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not release the product into drains. Avoid the release into
the environment.