Instructions

19 // GB
Trimming the quadcopter
Already shortly before the quadcopter takes off, you can recognize
whether it wants to turn or glide in a particular direction. Correct
the deviations from the vertical ascent with the trim knob of the
turn function.
Tip of the fuselage turns to the right:
• Reduce speed and push the trim slider of the turn function on
the left remote control lever stepwise to the left.
• Push the pitch-lever forward again and check whether the
correction was sufficient, if necessary shift the trim further to
the left.
• Repeat the process until the quadcopter no longer shows a
tendency to turn to the right.
Tip of the fuselage turns to the left:
• Proceed as described above, but push the trim slider of the turn
function stepwise to the right.
FLIGHT OPERATION
It is best to fly only in closed rooms
• With sufficient free space in all directions
• On flat ground
• Without standing (furniture) or moving obstacles (persons,
animals)
• In rooms without air draught
If you want to fly outdoors, do this
• Only when there is no wind
Do not fly
• If you are exhausted or your reaction is impaired in any way.
• At wind-force 1 or greater.
• Keep your model away from high-voltage cables or radio
masts. Never use the model in lightning storms. Atmospheric
disturbances can affect the signals of your remote controlling
transmitter.
• Near any obstacles such as buildings, furniture, persons and
animals.
• On public
roads