Instructions

17 // GB

Now push the throttle lever fully down and then switch on the

transmitter.

GET THE HELICOPTER READY FOR TAKEOFF

Now we‘re good to go! But before liftoff, make sure that you have read this manual through completely.

Connect the battery to the helicopter. Switch the helicopter on and

place it on a level surface.

Now move the throttle lever completely up and then back down.

Now the helicopter is ready to launch.

ON/OFF

switch

LIPO BATTERY CHARGING

The helicopter is fitted with a LiPo battery.

3.7 V LiPo battery.

The supplied LiPo battery is stored in the body of the helicopter.

Charging via the radio control unit:

- Switch the radio control unit ON

- Switch the helicopter OFF

- Connect the USB charging cable between the radio control

unit and the helicopter

- Power LED on the USB charger goes out: charging battery

- LED glows: battery is charged

Charging from a computer USB connection:

- Switch the helicopter OFF

- Connect the USB charging cable between the computer and

the helicopter

- Power LED on the USB charger goes out: charging battery

- LED glows: battery is charged

ON/

OFF