Instructions

GB // 16

BATTERY MOUNTING

Attention

• Never mix used and new batteries.

• Never use batteries of different types together.

• Do not attempt to charge non-rechargeable batteries.

INPUT KEY FUNCTION

Remove screw of the battery-cover. Remove the cover.

Close the battery-case.

Put fresh AA Mignon batteries with correct polarity into the

battery-case.

Mount the screw of the cover again.

S/N Identification Function

1 Left control lever Moving the control lever forwards or backwards makes the copter climb or dive.

2 Rotate trim /

Calibration button

The rotate trim adjusts the rotation to the left or right. / By pressing both buttons simultane-

ously (power button will flash 3 times) the model will be recalibrated (set to neutral position)

3 On/off switch Pressing the switch alters the copter‘s agility

4 Right control lever Moving the control lever forwards or backwards makes the copter move forwards or back

wards. Moving the control lever to the left or right makes the copter rotate to the left or right.

6 USB charging connector Charging the helicopter via the transmitter

7 Frequency selection A/B Press down button for 2 sec. - power button will flash once (frequency “A”), or twice (fre

quency “B”)

4 x AA (LR06)