User manual

19 // GB
MOTOR
The model is supplied with a standard air filter with foam insert.
The foam inserts should be changed or cleaned at regular intervals.
Before use, spray the foam inserts with air filter oil. The ignition
cable and spark plug connector must be checked at regular
intervals for correct insulation.
Operating the engine
Lever position: Actuating the pump:
Pull starter
Idle setting screw
Full load mixture
screw
Ignition interrupt / Off switch
Off switch
open
closed
Choke lever
Throttle control
Spark plugs
Air filter
Fuel
pump
Idle mixture
screw