User manual

CARSON Rapscallion brushless 500108010

b. Insert the Driving Battery

1 Open the boot cover.

2 Insert the fully charged power pack.

3 Fix the power pack with the "Velcro" tape attached to the hull.

4 The transmitter must be switched on before the power pack is

connected to the ESC. Observe the correct polarity.

5 Hook the rubber retainer into the eye on the cover.

6 Now replace the boat cover on the hull. Ensure that it is properly

seated.

The cover must then be sealed all round the

edge with adhesive tape!

Red

cable

Black

cable