User manual

CARSON Brushless Speed Controller Dragster 6S

Connect the ESC, motor, receiver,

battery and servo according to the

following diagram.

Positive (+) and negative (-) wires of the ESC are

connected with the battery pack. A, B and C are

connected with the motor wires. The control cable

of the ESC (wires in black, red and white colour) is

connected with the throttle channel of the receiver

(usually CH2).

The A, B, C wires of the ESC can be connected with

the motor wires freely (without any order). If the

motor runs in the opposite direction, please swap

any two wire connections.

c. Connection/Cabling

Brushless motor

Input TH channel

Orange

wire

Yellow wire

Blue wire

Steering servoInput

ST-wire

Switch

Receiver

Black power

wire (battery

negative)

Red power wire

(battery

positive)

Battery

OFF