Specifications

CARROLL TOUCH Appendix D - CTKERN Function Reference
Touch System Programmer’s Guide D-41
SetZ-AxisScalingParameters (12)
Description
This function sets the z-axis scaling parameters.
Call with
AL = 12 (function number).
CL = Minimum z-axis pressure value.
DL = Maximum z-axis pressure value.
Notes
The origin of the z-axis parameter may be changed from the minimum
z-axis pressure value to the maximum z-axis pressure value by
specifying a larger value for the maximum z-axis pressure value than
for the minimum z-axis pressure value.
The default value for the minimum and maximum z-axis pressure
values are 0 and 255, respectively.