Specifications

CARROLL TOUCH Appendix B - Smart-Frame Protocol II Function Reference
Touch System Programmer’s Guide B-7
Either an infrared modular frame with RS-232 controller or an infrared
Smart-Frame with a single 8051 processor would report:
E0 13 00 11 03 01 01 01 01 02 03 01 01 02 01 03
00 03 01 01 02 FF
An infrared Smart-Frame with dual 68705 processors may report:
E0 17 00 11 04 01 01 01 01 02 03 01 01 02 01 03
00 03 01 01 03 03 01 01 03 FF
The above report indicates that the system has four components (04).
The first component is a frame (01), with one attribute (01) of touch
technology (01) of IR (01). The second component is a controller (02)
(which happens to be integrated with the frame) with three attributes
(03): a touch technology attribute (01) of IR (01), an interface
attribute (02) of RS-232 (01), and a sensitivity attribute (03) which
does not support dual sensitivity (00). The third component of the
controller is a processor (03), with one attribute (01) of processor
family (01) of 6805 family (03). The last component is also a
processor (03), with one attribute (01) of processor family (01) of
6805 family (03).
An infrared modular frame with ISA bus controller (HBC) with 8052
processor may report:
E0 13 00 11 03 01 01 01 01 02 03 01 01 02 02 03
00 03 01 01 02 FF