Specifications

CARROLL TOUCH Appendix A - Smart-Frame Protocol Command Reference

Touch System Programmer’s Guide A-29

Report_Transfer_Off (43H) (C)

Command Description

The Report_Transfer_Off (43H) command stops the transmission of

touch data to the host. If the transfer of a report is in process, it is

completed. The touch system continues to scan until another report is

generated and stored in the touch report buffer. The touch system then

stops scanning and waits for the host to send either the

Report_Transfer_On (44H), Get_One_Report (46H), or

Clear_Touch_Report_Buffer (3DH) command. When the host sends

Report_Transfer_On (44H), the touch system sends the coordinates in

the touch report buffer (if any) or scans until another report is ready for

transfer. The system default setting for report transfer is off.