Specifications

CARROLL TOUCH Appendix A - Smart-Frame Protocol Command Reference

Touch System Programmer’s Guide A-9

T = Identifying number.

1 = Non-contiguous x-stylus.

2 = Non-contiguous y-stylus.

3 = Non-contiguous x- and y-styli.

FF = End of report.

Caution

Because non-contiguous touches can occur accidentally, do not use

Non-Contiguous Coordinate Reports to indicate a specific

selection or trigger a critical function.

See Add_Exit_Point_Modifier (29H) in this appendix for details of the

Add Exit Point Coordinate Report.

Example

An example of a Touch Coordinate Report is:

FE 04 10 FF

It indicates that the center of the stylus at logical coordinate x is 4, and

the center of the stylus at logical coordinate y is 16.