Specifications

CARROLL TOUCH Appendix A - Smart-Frame Protocol Command Reference

Touch System Programmer’s Guide A-7

Continuous_Mode (27H) (’)

Command Description

When the touch mode is set to Continuous Mode by sending the

Continuous_Mode (27H) command, the touch system sends Touch

Coordinate Reports to the host as long as the stylus is in the touch active

area. Touch Coordinate Reports are continuously sent whether the

stylus is moving or stationary. Process control applications use

Continuous Mode to control specific functions such as filling a tank.

Report Format

When the touch mode is set to Continuous Mode, the touch system

reports the coordinates of the stylus using the Touch Coordinate

Report. See Coordinate Reporting (23H) in this appendix for the format

of the Touch Coordinate Report and Non-Contiguous Coordinate

Report.

Example

See Coordinate Reporting (23H) in this appendix for examples of the

Touch Coordinate Report and Non-Contiguous Coordinate Report.