Specifications

Touch System Programmer’s Guide A-1
Smart-Frame
Protocol
Command
Reference
A
his appendix lists each SFP command in alphabetic and numeric
order, respectively, and subsequently gives the details of each SFP
command.
• Add_Exit_Point_Modifier (29H).
• Clear_Touch_Report_Buffer (3DH).
• Continuous_Mode (27H).
• Coordinate_Reporting (23H).
• Echo_Off (21H).
• Echo_On (20H).
• Enter_Point_Mode (25H).
• Exit_Point_Mode (28H).
• Get_Configuration_Report (33H).
• Get_Error_Report (32H).
• Get_Failed_Beam_Report (36H).
• Get_Firmware_Version_Report (34H).
• Get_Frame_Size_Report (37H).
• Get_One_Report (46H).
• Get_State_Report (47H).
• Hardware_Flow_Control_Off (42H).
• Hardware_Flow_Control_On (41H).
• Report_Transfer_Off (43H).
• Report_Transfer_On (44H).
• Reset (45H).
T
Smart-Frame
Protocol
Command
Reference