Specifications

CARROLL TOUCH Chapter 7 - CTKERN
Touch System Programmer’s Guide 7-15
Operation
You may create, edit, and delete calibration parameter sets for up to ten
video modes.
When CALIB.EXE is started, a message is displayed that indicates
where the calibration data is being read from, followed by the Main
Menu screen, shown in Figure 7-6. The Main Menu screen displays the
parameters for each of the ten calibration table entries, along with the
Main Menu options. See SetCalibrationTableEntry (6) in Appendix D
for a definition of the flags.
Figure 7-6. Calibration Main Menu Screen
Press F2 to designate the default calibration table entry. You are
prompted to enter the calibration table index number for the default.
The default calibration table entry holds the calibration parameters that
are used when the calibration and/or scaling modes are set to “fixed.”
A default calibration table entry must be specified before exiting
calibration.
Press 0 through 9 to display the calibration parameters for the selected
calibration table entry, along with the Calibration Menu. (See Figure
7-7.)
CTKERN Calibration V1.0
Table BiosVideo ---------Flags-------- --Scaling-- --------Calib Params--------
Index Mode (hex) Default Graphics/Text Xres Yres Xoff Yoff Xspan Yspan
0 03 Yes Text 080 025 02 03 72 58
1 10 No Graphics 640 350 03 05 70 56
2 12 No Graphics 640 480 02 04 68 59
3
4
5
6
7
8
9
Main Menu
0-9 = Select Calibration Table Entry
F1 = Help
F2 = Set Default Calibration Table Entry