Instruction manual

S Verify the status of the Wi -- Fi connection by touching VIEW REMOTE

ACCESS STATUS on the WI--FI SETUP screen

d “Connected” should appear next to Network Status

d If the Network Status is “not connected”, repeat the process in section 7.2

d The MyInfinity Server status may take up to 15 minutes to show “Connec-

ted” due to Internet traffic

d If the MyInfinity Server status fails to show “Connected” after 15 minutes,

check Internet connectivity with other devices in the home. The

homeowner should contact their Internet Service provider to diagnose

general Internet problems in the home

d If you continue to have problems, call 1-- 800-- CARRIER for support

Once Internet connectivity is established, the weather forecast should appear on the

HOME screen and on the WEATHER button/screen, found on the second page

under the MENU option.

7.3. Connect to MyInfinity Web Server

After connection to the Internet is established, the Infinity Touch Control must

this, touch the WIRELESS icon from the second page of the MENU screen. In the

WI--FI SETUP screen, touch MyInfinity REGISTRATION INFO. Write down

the Infinity Touch Control Serial Number, MAC Address, and PIN that are

displayed on this screen. This is the information that the consumer will need to

website. It is also the information that

you may need to identify the system through www.HVACpartners.com

,ifthe

homeowner allows you access to their system.

NOTE: DO NOT use the MAC address, serial number or security key from the

Wireless Access Point label to register on the MyInfinity website. It will NOT work.

Use the Infinity Touch control information from the MyInfinity Registration Info

screen to register the system on the MyInfinity website.