Instruction manual

59
indicator lights will begin to blink (LAN Activity, Wi--Fi Activity and WAN/Internet
Activity).
Verify the signal strength of the wireless access point radio signal at the desired
location of the Infinity Touch Control with a wireless laptop computer. Use the Scan
for Wireless Networks utility and verify that the signal for “MyHVACxxxxxx” is
“Strong” or better. If not, reposition the wireless access point to provide a strong
signal at the wall control location.
7.2. Connect the Infinity Touch Control to the Wireless Access
Point
Touch the WIRELESS icon from the second page of the Infinity Touch Control
MENU screen. First, enable the Wi --Fi connection by touching the ENABLE
button.
A12206
S Verify that the Wi -- Fi connection is enabled, by noting that ENABLED is
highlighted in green.
S Touch SETUP A WI--FI CONNECTION to begin the process.
S Next, touch SCAN FOR AVAILABLE ACCESS POINTS.