Instruction manual

34
heating capacity. Reducing this value will reduce the heating capacity of the heat
pump. After the selection is made, touch SAVE.
S AC Heat Pump Max RPM: Adjustable from 4500 – 7000
d Default = 4500 RPM
6.3.4.6. High Cool Latch
This option sets the outside temperature above which only the high stage (of a
2--stage outdoor unit) will run when cooling. After the selection is made, touch
SAVE.
S High Cool Latch: Selectable from 80_F--110_F(27_Cto43_C),Off,Onor
Disable
d Default = Off
6.3.4.7. High Heat Latch
This option sets the outside temperature below which only the high stage (of a
2--stage outdoor unit) will run when heating. After the selection is made, touch
SAVE.
S High Heat Latch: Selectable from 2 0_F--50_F(--7_Cto10_C), Off, On or
Disable
d Default = Off
6.3.4.8. Defrost Fan Delay
Turns on the outdoor unit fan at the end of a defrost cycle for approximately 12
seconds. This helps to reduce any nuisance refrigerant noise caused by the
switching reversing valve. This setup is only available on communicating heat
pumps. After the selection is made, touch SAVE.
S Defrost Fan Delay: Yes o r No
d Default = No