Instruction manual

d Default = 15 minutes

S Electric Reheat: Ye s or No

d Default = No

6.3.2.3. Fan Coil G--Terminal

This setup option selects desired operation when the R --G circuit changes state on

the fan coil control board depending on setup.

Under the function option, FAN turns on fan to selected fan speed when G terminal

is energized. SHUTDOWN shuts off fan and equipment when initiated. After the

selections are made, touch SAVE.

S Function: Disabled, Fan or Shutdown

d Default = Disabled

S Fan Speed: Low, Med, or High

d Default = Low

S Shutdown:

d Normally Ope n

d Normally Closed

6.3.3. Furnace

First touch SETUP, then touch FURNACE to se t up the parameters for the furnace

unit.