Instruction manual

6.3.1.7. Temperature Units Display

This option allows the installer to choose between Fahrenheit and Celsius display.

After the selection is made, touch SAVE.

S Display Option: Selectable between _Fand_C

d Default = _F

6.3.2. Fan Coil

First touch SETUP, then touch FAN COIL to set up the parameters for the fan coil

unit.

A12188

6.3.2.1. Fan Coil Airflow

This option allows the installer to select the appropriate air flow based on the needs

of the installation. The QUIET airflow means the minimum cooling airflow that the

system can safely run (typically 300 CFM/ton). Use this setting if duct noise is a

severe problem. Note that duct sweating in high humidity environments could

become an issue at low airflows. The COMFORT airflow means airflo w is varied

depending on humidity and temperature demand settings. This selection enables the

full dehumidify and comfort capabilities of the system. The EFF325 airflow is a

fixed airflow used to achieve specified ratings – no dehumidification airflow