Instruction manual

6
Fig. 1 — 50RHC Dimensional Data
NOTES:
1. Condensate is
3
/
4
-in. FPT copper.
2. Horizontal unit shipped with filter bracket only. This bracket should be removed for return duct connection.
3. Hanger kit is factory installed.
4. Verify high static option discharge connection dimensions with Carrier.
50RHC
UNITS
OVERALL CABINET
WATER CONNECTIONS ELECTRICAL KNOCKOUTS (in.)
DISCHARGE CONNECTION
Duct Flange Installed (±
±±
±0.10 in.)
RETURN CONNECTION
Using Air Coil Opening
1 — In 2 — Out
H
1
/
2
conduit
J
1
/
2
conduit
K
3
/
4
conduit
A
Width
B
Depth
C
Height
DE FG
Low
Voltage
Ext Pump
Power
Supply
L
M
Supply
Height
N
Supply
Depth
OP
Q
Return
Depth
R
Return
Height
ST
018-030
in. 20.1 43.1 17.1 15.3 2.4 1.9 2.1 12.1 9.1 6.1 2.6 13.3 9.9 4.1 1.3 23.0 15.0 1.1 1.0
cm 51.1 109.5 43.4 38.9 6.1 4.9 5.3 30.8 23.2 15.6 6.6 33.8 25.1 10.5 3.3 58.4 38.1 2.8 2.5
036-042
in. 20.1 47.1 21.1 18.8 2.2 4.7 1.2 16.1 13.1 10.1 2.5 16.1 11.0 3.0 2.5 25.9 19.0 1.1 1.0
cm 51.1 119.6 53.6 47.6 5.5 11.9 3.0 41.0 33.3 25.7 6.3 40.9 27.9 7.7 6.4 65.8 48.3 2.8 2.5
048
in. 24.1 54.1 21.1 19.4 5.9 4.3 2.3 16.1 13.1 10.1 3.7 16.1 13.7 4.1 1.3 35.9 19.0 1.1 1.0
cm 61.2 137.4 53.6 49.2 14.9 11.0 5.8 41.0 33.3 25.7 9.5 41.0 34.8 10.3 3.2 91.2 48.3 2.8 2.5
060
in. 24.1 54.1 21.1 19.4 5.9 4.3 2.3 16.1 13.1 10.1 1.7 18.1 13.7 4.1 1.3 35.9 19.0 1.1 1.0
cm 61.2 137.4 53.6 49.2 14.9 11.0 5.8 41.0 33.3 25.7 4.4 46.0 34.8 10.3 3.2 91.2 48.3 2.8 2.5
AIRFLOW CONFIGURATION
Code Return Discharge
S Left Right
E Left Back
Z Right Left
B Right Back