Specifications

14
OCCUPANCY SCHEDULE — For scheduling flexibility, the
occupancy programming is broken into eight separate periods.
For each period the schedule contains the following fields: Day
of Week, Occupied From, and Occupied To.
DAY OF WEEK — The Day of Week configuration consists
of eight fields corresponding to the seven days of the week and
a holiday field in the following order: Monday, Tuesday,
Wednesday, Thursday, Friday, Saturday, Sunday, Holiday.
It is displayed as:
M T W Th Fr Sa Su Hol
0 0 0 0 0 0 0 0
If a 1 is configured in the corresponding place for a certain
day of the week, the related “Occupied from” and “Occupied
to” times for that period will take effect on that day of the
week. If a 1 is placed in the holiday field, the related times will
take effect on a day configured as a holiday. A zero means the
schedule period will not apply to that day.
Day of week: Range: 0 or 1
Default Values: 11111111 for period 1,
00000000 for the rest of
the periods
OCCUPIED FROM — This field is used to configure the
hour and minute, in military time, that the mode for the
PremierLink controller will switch to occupied.
Occupied From: Units: Hours:Minutes
Range: 00:00 to 24:00
(Minutes 00 to 59)
Default Value: 00:00
OCCUPIED TO — This field is used to configure the hour
and minute, in military time, that the mode for the PremierLink
controller switches from occupied to unoccupied.
Occupied To: Units: Hours:Minutes
Range: 00:00 to 24:00
(Minutes 00 to 59)
Default Value: 24:00
Table 10 — Occupancy Configuration
Set Point Screen —
The Set Point screen is used to con-
figure the occupied and unoccupied set points. See Table 11.
OCCUPIED LOW — The Occupied Low set point describes
the low temperature limit of the space during Occupied mode.
Occupied Low: Units: Degrees F (Degrees C)
Range: 40.0 to 90.0
Default Value: 70.0
OCCUPIED HIGH — The Occupied High set point describes
the high temperature limit of the space during Occupied mode.
Occupied High: Units: Degrees F (Degrees C)
Range: 45.0 to 99.9
Default Value: 74.0
UNOCCUPIED LOW — The Unoccupied Low set point
describes the low temperature limit of the space during
Unoccupied mode.
Unoccupied Low: Units: Degrees F (Degrees C)
Range: 40.0 to 90.0
Default Value: 75.0
UNOCCUPIED HIGH — The Unoccupied High set point de-
scribes the high temperature limit of the space during Unoccu-
pied mode.
Unoccupied High: Units: Degrees F (Degrees C)
Range: 45.0 to 99.9
Default Value: 90.0
HIGH OAT LOCKOUT FOR THERMOSTAT (NOT
USED) — The High OAT Lockout for Thermostat function
determines if the Economizer Damper is able to adjust the
Space Temperature based on the current temperature value of
OAT (outdoor air temperature).
High OAT
Lockout: Units: Degrees F (Degrees C)
Range: 55.0 to 75.0
Default Value: 65.0
UNOCCUPIED OAT LOCKOUT TEMPERATURE (NOT
USED) — The Unoccupied OAT Lockout Temperature
describes the lowest Outdoor Air Temperature allowed for
Unoccupied Free Cooling operation. This function is also used
by IAQ Pre-Occupancy Purge control to determine the mini-
mum damper position.
Unoccupied
OAT Lockout: Units: Degrees F (Degrees C)
Range: 40.0 to 70.0
Default Value: 50.0
UNOCCUPIED HEATING DEADBAND — The Unoccu-
pied Heating Deadband describes the space temperature value
which has to be achieved while Heating before the Heating
mode will turn off.
Unoccupied
Heating
Deadband: Units: Delta Degrees F
(Delta Degrees C)
Range: 0.0 to 10.0
Default Value: 1.0
UNOCCUPIED COOLING DEADBAND — The Unoccu-
pied Cooling Deadband describes the space temperature value
which has to be achieved while Cooling before the Cooling
mode will turn off.
Unoccupied
Cooling
Deadband: Units: Delta Degrees F
(Delta Degrees C)
Range: 0.0 to 10.0
Default Value: 1.0
DESCRIPTION VALUE UNITS NAME
Manual Override Hours 0 hours OVRD
Period 1: Day of Week 11111111 DOW1
Period 1: Occupied from 00:00 OCC1
Period 1: Occupied to 24:00 UNOCC1
Period 2: Day of Week 00000000 DOW2
Period 2: Occupied from 00:00 OCC2
Period 2: Occupied to 24:00 UNOCC2
Period 3: Day of Week 00000000 DOW3
Period 3: Occupied from 00:00 OCC3
Period 3: Occupied to 24:00 UNOCC3
Period 4: Day of Week 00000000 DOW4
Period 4: Occupied from 00:00 OCC4
Period 4: Occupied to 24:00 UNOCC4
Period 5: Day of Week 00000000 DOW5
Period 5: Occupied from 00:00 OCC5
Period 5: Occupied to 24:00 UNOCC5
Period 6: Day of Week 00000000 DOW6
Period 6: Occupied from 00:00 OCC6
Period 6: Occupied to 24:00 UNOCC6
Period 7: Day of Week 00000000 DOW7
Period 7: Occupied from 00:00 OCC7
Period 7: Occupied to 24:00 UNOCC7
Period 8: Day of Week 00000000 DOW8
Period 8: Occupied from 00:00 OCC8
Period 8: Occupied to 24:00 UNOCC8