Specifications
26
2297
2457
219
2200
636
341
323
596
622
368
2253
1500
1500
1500
500
1
1
1
1
3
2
11.2.1 - 30RB 262 - Total heat reclaim condenser option
Power connection
3” Victaulic type 75
4” Victaulic type 75
4” Victaulic type 75
3” Victaulic type 75
NOTE: Non-contractual drawings.
When designing an installation, refer to the certified
dimensional drawings, available on request.
For the positioning of the fixing points, weight distribu-
tion and centre of gravity coordinates.
ATTENTION: The Victaulic flange sleeves of the conden-
ser are not installed, but supplied with the unit. The
temperature sensors and the condenser flow switch are in
the control box and wired. After connecting the Victaulic
flange sleeves, the temperature sensors must be installed,
as well as the water flow switch which must be located in
the condenser outlet.
Clearances required for maintenance and air flow
Clearances recommended for evaporator tube
removal
Clearances recommended for heat exchanger
removal
Water inlet
Water outlet
Air outlet, do not obstruct
1
2
3